Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Testing and evaluation of residues as a binder component for deep mixing and jet grouting
Swedish Geotechnical Institute.
2018 (English)In: Urbanization and Infrastructure Development, Future Challenges: International Conference on Deep Foundations and Ground Improvement, DFI- EFFC2018, Rome, Italy, 5-8 June, 2018, Rome: DFI-EFFC , 2018, p. 1290-1299Conference paper, Published paper (Refereed)
Abstract [en]

The Ports of Stockholm is building a new port for rolling goods and container traffic. The Stockholm Norvik Port will open in 2020 and is will be the Baltic Sea freight of the future. The new area was a bay that was filled with crushed bedrock in the 1980s. During the construction two large volumes of approximately 300000 m3 of very soft clay was trapped inside the fill. Due to the procedure for placing the fill, two thirds of the clay were covered with crushed rock whereas for the remaining part the clay reached the surface. To improve the shear strength of the clay two different improvement techniques were employed. In the case with very soft clay all the way up to the surface, deep mixing was applied and in areas were the clay was superimposed with crushed rock, jet grouting was used. In the deep mixing area, the columns were 800 mm in diameter and the total area ratio was 70 %. The total length of the columns were approximately 200000 meters. The jet grouting was designed with a diameter of 1.5 meter and a spacing of 2.5 meters and a total length of 40000 meters. The main goal was to find a cost efficient and environmental friendly binder combination for deep mixing as well as for the jet grouting at The Stockholm Norvik Port.

Place, publisher, year, edition, pages
Rome: DFI-EFFC , 2018. p. 1290-1299
Keywords [en]
Soft clay, Deep mixing column, Jet grouting, Soil stabilization, Lime, Cement, Kiln dust, Slag, Binder content, Shear strength, Harbour, Norvik, Stockholm, Sweden, Conference, Rome, 2018, English
National Category
Geotechnical Engineering
Identifiers
URN: urn:nbn:se:swedgeo:diva-805Local ID: 000086050OAI: oai:DiVA.org:swedgeo-805DiVA, id: diva2:1358467
Conference
International Conference on Deep Foundations and Ground Improvement: Urbanization and Infrastructure Development: Future Challenges, DFI- EFFC2018, Rome, Italy, 5-8 June, 2018
Available from: 2019-10-07 Created: 2019-10-07 Last updated: 2019-10-18

Open Access in DiVA

No full text in DiVA

By organisation
Swedish Geotechnical Institute
Geotechnical Engineering

Search outside of DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric score

urn-nbn
Total: 14 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf